Spectroscopic Properties Research Articles

2-in-1 Phase Space Sampling for Calculating the Absorption Spectrum of the Hydrated Electron.

The investigation of vibrational effects on absorption spectrum calculations often employs Wigner sampling or thermal sampling. While Wigner sampling incorporates zero-point energy, it may not be suitable for flexible systems. Thermal sampling is applicable to anharmonic systems yet treats nuclei classically. The application of generalized smoothed trajectory analysis (GSTA) as a postprocessing method allows for the incorporation of nuclear quantum effects (NQEs), combining the advantages of both sampling methods. We demonstrate this approach in computing the absorption spectrum of a hydrated electron. Theoretical exploration of the hydrated electron and its embryonic forms, such as water cluster anions, poses a significant challenge due to the diffusivity of the excess electron and the continuous motion of water molecules. In many previous studies, the wave nature of atomic nuclei is often neglected, despite the substantial impact of NQEs on thermodynamic and spectroscopic properties, particularly for hydrogen atoms. In our studies, we examine these NQEs for the excess electrons in various water systems. We obtained structures from mixed classical-quantum simulations for water cluster anions and the hydrated electron by incorporating the quantum effects of atomic nuclei with the filtration of the classical trajectories. Absorption spectra were determined at different theoretical levels. Our results indicate significant NQEs, red shift, and broadening of the spectra for hydrated electron systems. This study demonstrates the applicability of GSTA to complex systems, providing insights into NQEs on energetic and structural properties.

Evolution of structure and spectroscopic properties of a new 1,3-diacetylpyrene polymorph with temperature and pressure.

A new polymorph of 1,3-diacetylpyrene has been obtained from its melt and thoroughly characterized using single-crystal X-ray diffraction, steady-state UV-Vis spectroscopy and periodic density functional theory calculations. Experimental studies covered the temperature range from 90 to 390 K and the pressure range from atmospheric to 4.08 GPa. Optimal sample placement in a diamond anvil cell according to our previously presented methodology ensured over 80% data coverage up to 0.8 Å for a monoclinic sample. Unrestrained Hirshfeld atom refinement of the high-pressure crystal structures was successful and anharmonic behavior of carbonyl oxygen atoms was observed. Unlike the previously characterized polymorph, the structure of 2°AP-β is based on infinite π-stacks of antiparallel 2°AP molecules. 2°AP-β displays piezochromism and piezofluorochromism which are directly related to the variation in interplanar distances within the π-stacking. The importance of weak intermolecular interactions is reflected in the substantial negative thermal expansion coefficient of -55.8 (57) MK-1 in the direction of C-H...O interactions.

Structure and Spectroscopic Insights for CH3PCO Isomers: A High-Level Quantum Chemical Study.

The exploration of phosphorus-bearing species stands as a prolific field in current astrochemical research, particularly within the context of prebiotic chemistry. Herein, we have employed high-level quantum chemistry methodologies to predict the structure and spectroscopic properties of isomers composed of a methyl group and three P, C, and O atoms. We have computed relative and dissociation energies, as well as rotational, rovibrational, and torsional parameters using the B2PLYPD3 functional and the explicitly correlated coupled cluster CCSD(T)-F12b method. Based upon our study, all the isomers exhibit a bent heavy atom skeleton with CH3PCO being the most stable structure, regardless of the level theory employed. Following in energy, we found four high-energy isomers, namely, CH3OCP, CH3CPO, CH3COP, and CH3OPC. The computed adiabatic dissociation energies support the stability of all [CH3, P, C, O] isomers against fragmentation into CH3 and [P, C, O]. Torsional barrier heights associated with the methyl internal rotation for each structure have been computed to evaluate the occurrence of possible A-E splittings in the rotational spectra. For the most stable isomer, CH3PCO, we found a V3 barrier of 82 cm-1, which is slightly larger than that obtained experimentally for the N-counterpart, CH3NCO, yet still very low. Therefore, the analysis of its rotational spectrum can be anticipated as a challenging task owing to the effect of the CH3 internal rotation. The complete set of spectroscopic constants and transition frequencies reported here for the most stable isomer, CH3PCO, is intended to facilitate eventual laboratory searches.

The Role of the Unbinding Cycle on the Coordination Abilities of the Bi-Cyclopeptides toward Cu(II) Ions

Bicyclic peptides have attracted the interest of pharmaceutical companies because of their remarkable properties, putting them on a new path in medicine. Their conformational rigidity improves proteolytic stability and leads to rapid penetration into tissues via any possible route of administration. Moreover, elimination of renal metabolism is of great importance, for example, for people with a history of liver diseases. In addition, each ring can function independently, making bicyclic peptides extremely versatile molecules for further optimization. In this paper, we compared the potentiometric and spectroscopic properties studied by UV–vis, MCD, and EPR of four synthetic analogues of the bi-cyclic peptide c(PKKHP-c(CFWKTC)-PKKH) (BCL). In particular, we correlated the structural and spectral properties of complexes with coordinating abilities toward Cu(II) ions of MCL1 (Ac-PKKHPc(CFWKTC)PKKH-NH2) that contains the unbinding cycle and N- and C-terminal linear parts with two histidine residues, one per part; two monocyclic ligands containing one histidine residue, both in the N-terminal position, i.e., MCL2 (Ac-PKKHPc(CFWKTC)PKKS-NH2) and in the C-terminal position, i.e., MCL3 (Ac-PKKSPc(CFWKTC)PKKH-NH2), respectively; and the linear structure LNL (Ac-PKKHPSFWKTSPKKH-NH2). Potentiometric results have shown that the bicyclic structure promotes the involvement of the side chain imidazole donors in Cu(II) binding. On the other hand, the results obtained for the mono-cyclic analogues lead to the conclusion that the coordination of the histidine moiety as an anchoring group is promoted by its location in the peptide sequence further from the nonbinding cycle, strongly influencing the involvement of the amide donors in Cu(II) coordination.

Synthesis and Regioselective Functionalization of Tetrafluorobenzo-[α]-Fused BOPYPY Dyes.

The synthesis of a new bis-BF2 tetrafluorobenzo-[α]-fused BOPYPY dye from 4,5,6,7-tetrafluoroisoindole and 2-hydrazinopyrazine is reported. The regioselectivity of nucleophilic substitution reactions at the periphery of the tetrafluorinated BOPYPY and its α-bromo derivative were investigated using N-, O-, S-, and C-based nucleophiles. Among the aromatic fluorine atoms, the F2 atom is consistently regioselectively substituted, except when the α-position contains a thiophenol group; in this case, F4 is substituted instead due to stabilizing π-π-stacking between the two aromatic groups. The α-bromo BOPYPY derivative also reacts under Stille cross-coupling reaction conditions to produce the corresponding α-substituted product. The spectroscopic properties of these new fluorinated BOPYPYs were investigated and compared with nonfluorinated analogs.

Crystal growth and spectroscopic properties of Nd3+ -doped SrB4O7 single crystal

Single crystal of Nd3+ -doped SrB4O7 (SBO) has been successfully grown by the Czochralski method. The spectroscopic properties were investigated and spectral parameters were calculated based on the Judd–Ofelt theory. The results suggest that the Nd:SBO crystal may have great potential as laser crystal, and through self-frequency doubling, it is expected to achieve the frequency conversion of the characteristic output of Nd3+ in the near infrared to obtain a visible laser.

Meso-Tetrahexyl-7,8-dihydroxychlorin and Its Conversion to ß-Modified Derivatives.

meso-Tetrahexylporphyrin was converted to its corresponding 7,8-dihydroxychlorin using an osmium tetroxide-mediated dihydroxylation strategy. Its diol moiety was shown to be able to undergo a number of subsequent oxidation reactions to form a chlorin dione and porpholactone, the first meso-alkylporphyrin-based porphyrinoid containing a non-pyrrolic building block. Further, the diol chlorin was shown to be susceptible to dehydration, forming the porphyrin enol that is in equilibrium with its keto-chlorin form. The meso-hexylchlorin dione could be reduced and it underwent mono- and bis-methylation reactions using methyl-Grignard reagents, and trifluoromethylation using the Ruppert-Prakash reagent. The optical and spectroscopic properties of the products are discussed and contrasted to their corresponding meso-aryl derivatives (where known). This contribution establishes meso-tetrahexyl-7,8-dihydroxychlorins as a new and versatile class of chlorins that is susceptible to a broad range of conversions to generate functionalized chlorins and a pyrrole-modified chlorin analogue.

Current problems in the field of structure, properties of minerals and methods of their investigation

The main goal of research into the structure and properties of minerals, as well as their crystal chemistry and physics, consists in obtaining fundamental information about the actual atomic and electronic structure of mineral objects and physical regularities of their transformations under the influence of external factors (temperature, pressure, radiation, and environmental chemistry). Such information forms the basis for mineral typification and restoration of mineral crystallization conditions and their evolution in a certain geological situation. This information is widely used in petrogenetic and geochronological constructions. Such studies are also relevant to the development of nature-like technologies for obtaining new promising functional materials. Knowledge of the structure, crystal chemistry, and physics of minerals, typomorphism of their spectroscopic properties, as well as the development of analytical techniques and methods for the synthesis of mineral-like materials are of particular significance. This thematic issue of the Lithosphere journal aims to review of these problems in the context of the materials reported at the XIII All-Russian Scientific Conference “Minerals: Structure, Properties, Research Methods” held in 2023 at the Institute of Geology and Geochemistry of the Ural Branch of the Russian Academy of Sciences in Yekaterinburg.

Optoelectronic Response to the Fluor Ion Bond on 4-(4,4,5,5-Tetramethyl-1,3,2-dioxoborolan-2-yl)benzaldehyde.

Boronate esters are a class of compounds containing a boron atom bonded to two oxygen atoms in an ester group, often being used as precursors in the synthesis of other materials. The characterization of the structure and properties of esters is usually carried out by UV-visible, infrared, and nuclear magnetic resonance (NMR) spectroscopic techniques. With the aim to better understand our experimental data, in this article, the density functional theory (DFT) is used to analyze the UV-visible and infrared spectra, as well as the isotropic shielding and chemical shifts of the hydrogen atoms 1H, carbon 13C and boron 11B in the compound 4-(4,4,5,5-tetramethyl-1,3,2-dioxoborolan-2-yl)benzaldehyde. Furthermore, this study considers the change in its electronic and spectroscopic properties of this particular ester, when its boron atom is coordinated with a fluoride anion. The calculations were carried out using the LSDA and B3LYP functionals in Gaussian-16, and PBE in CASTEP. The results show that the B3LYP functional gives the best approximation to the experimental data. The formation of a coordinated covalent B-F bond highlights the remarkable sensitivity of the NMR chemical shifts of carbon, oxygen, and boron atoms and their surroundings. Furthermore, this bond also highlights the changes in the electron transitions bands n → π* and π → π* during the absorption and emission of a photon in the UV-vis, and in the stretching bands of the C=C bonds, and bending of BO2 in the infrared spectrum. This study not only contributes to the understanding of the properties of boronate esters but also provides important information on the interactions and responses optoelectronic of the compound when is bonded to a fluorine atom.

Structural and Spectroscopic properties of Eu3+ doped SiO2–TiO2 nanoparticles for photonic applications

The Eu3+-doped TiO2 nanoparticles in sol gel silicate glasses of composition (80-x)SiO2 + 20TiO2 + 0.5xEu2O3, (SiTiEu) where x = 0.0 0.5, 1.5, 2.5 and 3.5 mol%, have been prepared by sol-gel technique. The glass samples were investigated by thermos-gravimetric analysis (TGA/DTA), ATR-FTIR, XRD, SEM, TEM, EDX, optical absorption and photoluminescence emission spectroscopy at room temperature (RT). The absorption wavelength of TiO2 doped sol-gel silicate glass were red shifted due to a reduction in band gap energy with increasing annealing temperatures. According to the TEM images, all of the particles were spherical and had an average diameter is around 10 nm. The visible spectra of the Eu3+ doped TiO2 nanoparticles in sol-gel silicate glasses displayed characteristic PL emission 5D0→7FJ (J = 0, 1, 2, 3, 4, 5) transitions of Eu3+ ions at 370 nm excitation. The anatase TiO2:1.5Eu3+ nanocomposite showed high photoluminescence emission at 370 nm excitation, which was attributed to the f-f transitions of Eu3+. The hypersensitive 5D0→7F2 transition was responsible for the major red emission. From the recorded spectra, radiative parameters and Judd-Ofelt (JO) intensity parameters were computed. The Eu3+ co-doped TiO2 nanoparticles in sol-gel silicate glasses displayed emissions mostly in the red regions realized from a CIE chromaticity diagram. The results suggested that materials may be used as an optical material of technological importance such as display devices and also for optical amplifier.

Insights into a New Multi‐Stimuli‐Responsive Photochromic Metal‐Organic Framework: Highly Sensitive Turn‐On Luminescence in a Lanthanum Phosphonate

AbstractThe new microporous metal organic framework [La2(H2O)5(H2TPPE)]·3H2O (CAU‐54), is obtained in a hydrothermal reaction of the linker 1,1,2,2‐tetrakis(4′‐phosphonophenyl)ethylene (H8TPPE) and La3+ ions. The extensive characterization including temperature‐dependent crystal structures and spectroscopic properties allowed to understand the unique, multi‐responsive material properties. CAU‐54 exhibits rarely observed reversible photochromism as well as turn‐on photoluminescence by various external chemical or physical stimuli including change of pressure, solvent exchange, and temperature variation. These properties can be unequivocally assigned to the presence of tetraphenylethylene (TPE) moieties of the linker molecules within the MOF, i.e., the ordered spatial arrangement of the linker molecules, the presence of accessible pores as well as the coordination flexibility of the phosphonate groups and the rotational freedom of the linker. By temperature‐dependent steady‐state and time‐resolved luminescence studies, it is shown that this compound exhibits a) blue fluorescence that becomes effectively quenched at room temperature, b) green efficient luminescence with thermal stability up to 400 K, and c) red phosphorescence correlated to the observed photochromism. In addition, CAU‐54 shows unusual thermal expansion properties as shown by temperature‐dependent powder X‐ray diffraction measurements with identified transition points that correlate with the observed temperature‐dependent changes in the photoluminescence.

Electron paramagnetic resonance and luminescence spectroscopy of transition metal ion impurities and X-ray-induced radicals in brushite

Calcium phosphates hold paramount importance as the constituents of hard tissue of living organisms. Among them, brushite (CaHPO4·2H2O), also known as dicalcium phosphate dihydrate (DCPD), is a common precursor in phosphate synthesis and is becoming increasingly appealing as a biomaterial for bone regeneration applications. This study presents a comparative analysis of structural, morphological, thermal, and spectroscopic properties of synthetic brushite prepared by the wet precipitation method with several brushite products available from commercial vendors. Electron paramagnetic resonance (EPR) spectroscopy revealed that Mn2+ and Fe3+ ions are common trace impurities in commercial products. Following exposure to X-rays, EPR signals of several phosphorous-related radicals emerge. The annealing of the irradiated samples gives rise to broad thermally stimulated luminescence (TSL) signals in the 40-120 °C range, which correlates with the annealing kinetics of the radicals. The stability of radiation-induced EPR and TSL signals is limited by the phase transformation temperature from brushite to monetite (CaHPO4). The results of this study provide novel insights into the formation and stability of phosphorous-related radicals and demonstrate how minuscule amounts of impurity ions can strongly influence the spectroscopic properties of brushite.

Crystal structures, Hirshfeld surface analysis, thermogravimetric, and spectroscopic properties of three Zn(Ⅱ) complexes bridged by 4,4′-bipy with organic sulfonate anions as counterions

Three Zn(Ⅱ) sulfonate compounds: {[Zn3(Ac)4(4,4′-bipy)4]·2(3-pySO3)·H2O}n (1), {[Zn(4,4′-bipy)(H2O)4]·2(Me-phSO3)}n (2), and {[Zn(4,4′-bipy)(H2O)4]·2(NH2-phSO3)}n (3), were synthesized through solvent diffusion method at room temperature (3-pySO3H = Pyridine-3-Sulfonic acid; Me-phSO3H = P-Toluene Sulfonic acid; NH2-phSO3H = Sulfanilic acid). Single-crystal X-ray diffractions reveal that the crystal structure of compound 1 contains a 2D cationic layer with pseudo-square grid motifs formed by trinuclear Zn(II) units which connected by 4,4′-bipy ligands. Water molecule forms hydrogen bonds with free 3-PySO3− anions which are located in the voids of the cationic grids. Compounds 2 and 3 show isostructural 1D [Zn(4,4′-bipy)(H2O)4]2+ chains with sulfonate anions connected to the chain via hydrogen bonding. The weak interactions in the structures of the three compounds have been assessed using Hirshfeld surface analyses and 2D fingerprint plots. The Hirshfeld surface shows that the most important contributions for the crystal packing are from H···H and H··O/O··H interactions, which indicate dominant van der Waals interactions. In addition, the compounds were investigated by powder X-ray diffraction (PXRD), elemental analyses, UV–vis, FT-IR, solid-state fluorescence spectroscopy, and thermal analyses (TG-DSC).

Coordination Variations within Binuclear Copper Dioxygen-Derived (Hydro)Peroxo and Superoxo Species; Influences upon Thermodynamic and Electronic Properties.

Copper ion is a versatile and ubiquitous facilitator of redox chemical and biochemical processes. These include the binding of molecular oxygen to copper(I) complexes where it undergoes stepwise reduction-protonation. A detailed understanding of thermodynamic relationships between such reduced/protonated states is key to elucidate the fundamentals of the chemical/biochemical processes involved. The dicopper(I) complex [CuI2(BPMPO-)]1+ {BPMPOH = 2,6-bis{[(bis(2-pyridylmethyl)amino]methyl}-4-methylphenol)} undergoes cryogenic dioxygen addition; further manipulations in 2-methyltetrahydrofuran generate dicopper(II) peroxo [CuII2(BPMPO-)(O22-)]1+, hydroperoxo [CuII2(BPMPO-)(-OOH)]2+, and superoxo [CuII2(BPMPO-)(O2•-)]2+ species, characterized by UV-vis, resonance Raman and electron paramagnetic resonance (EPR) spectroscopies, and cold spray ionization mass spectrometry. An unexpected EPR spectrum for [CuII2(BPMPO-)(O2•-)]2+ is explained by the analysis of its exchange-coupled three-spin frustrated system and DFT calculations. A redox equilibrium, [CuII2(BPMPO-)(O22-)]1+ ⇄ [CuII2(BPMPO-)(O2•-)]2+, is established utilizing Me8Fc+/Cr(η6-C6H6)2, allowing for [CuII2(BPMPO-)(O2•-)]2+/[CuII2(BPMPO-)(O22-)]1+ reduction potential calculation, E°' = -0.44 ± 0.01 V vs Fc+/0, also confirmed by cryoelectrochemical measurements (E°' = -0.40 ± 0.01 V). 2,6-Lutidinium triflate addition to [CuII2(BPMPO-)(O22-)]1+ produces [CuII2(BPMPO-)(-OOH)]2+; using a phosphazene base, an acid-base equilibrium was achieved, pKa = 22.3 ± 0.7 for [CuII2(BPMPO-)(-OOH)]2+. The BDFEOO-H = 80.3 ± 1.2 kcal/mol, as calculated for [CuII2(BPMPO-)(-OOH)]2+; this is further substantiated by H atom abstraction from O-H substrates by [CuII2(BPMPO-)(O2•-)]2+ forming [CuII2(BPMPO-)(-OOH)]2+. In comparison to known analogues, the thermodynamic and spectroscopic properties of [CuII2(BPMPO-)] O2-derived adducts can be accounted for based on chelate ring size variations built into the BPMPO- framework and the resulting enhanced CuII-ion Lewis acidity.

The Characterization of Multifaceted PREP1 Peptides Provides Insights into Correlations between Spectroscopic and Structural Properties of Amyloid-like Assemblies.

The widespread ability of proteins and peptides to self-assemble by forming cross-β structure is one of the most significant discoveries in structural biology. Intriguingly, the cross-β association of proteins/peptides may generate intricate supramolecular architectures with uncommon spectroscopic properties. We have recently characterized self-assembled peptides extracted from the PREP1 protein that are endowed with interesting structural/spectroscopic properties. We here demonstrate that the green fluorescence emission of the peptide PREP1[117-132] (λem ~ 520 nm), can be induced by excitation with UV radiation. The associated unusually large Stokes shift (Δλ ~ 150 nm) represents, to the best of our knowledge, the first evidence of an internal resonance energy transfer in amyloid-like structures, where the blue emission of some assemblies becomes the excitation radiation for others. Moreover, the characterization of PREP1[117-132] variants provides insights into the sequence/structure and structure/spectroscopic properties relationships. Our data suggests that the green fluorescence is plausibly associated with antiparallel β-sheet states of the peptide whereas parallel β-sheet assemblies are only endowed with blue fluorescence. Notably, the different PREP1[117-132] variants also form assemblies characterized by distinct morphologies. Indeed, the parent peptide and single mutants form compact but structured aggregates whereas most of the double mutants exhibit elongated and highly extended fibers.

Molecular electrostatic potential (MEP), thermodynamic properties and spectral analysis of methyl orange doped L–lysine sulfate (MLLS) semi organic crystals

AbstractSemi organic compounds enable several structural and bonding methods for the molecular engineering of novel materials. The optical analysis, methyl orange doped L‐lysine sulfate (MLLS) is an innovative NLO material enabling the rate of frequency up change for stronger systems with lasers in the UV range with clear absorption. With this experimental studies the theoretical studies of the L‐lysine sulfate and its molecules were studied using Gaussian09w software. X‐ray analysis, UV, FTIR, NMR, Mulliken Charges, HOMO‐LUMO, MEP and some related thermodynamic properties were studied. The chosen nucleophilic site is symbolized by the color red, the more popular electrophilic site has been highlighted during MEP mapping. Spectroscopical and thermodynamical properties related to functional behavior of molecules were also discussed with obtained results.

Molecular Design Using Selected Concentration Effects in Optically Activated Fluorescent Matrices.

Molecular physics plays a pivotal role in various fields, including medicine, pharmaceuticals, and broader industrial applications. This study aims to enhance the methods for producing specific optically active materials with distinct spectroscopic properties at the molecular level, which are crucial for these sectors, while prioritizing human safety in both production and application. Forensic science, a significant socio-economic field, often employs hazardous substances in analyzing friction ridges on porous surfaces, posing safety concerns. In response, we formulated novel, non-toxic procedures for examining paper evidence, particularly thermal papers. Our laboratory model utilizes a polyvinyl alcohol polymer as a rigid matrix to emulate the thermal paper's environment, enabling precise control over the spectroscopic characteristics of 1,8-diazafluoro-9-one (DFO). We identified and analyzed the cyclodimer 1,8-diazafluoren-9-one (DAK DFO), which is a non-toxic and biocompatible alternative for revealing forensic marks. The reagents used to preserve fingerprints were optimized for their effectiveness and stability. Using stationary absorption and emission spectroscopy, along with time-resolved emission studies, we verified the spectroscopic attributes of the new structures under deliberate aggregation conditions. Raman spectroscopy and quantum mechanical computations substantiated the cyclodimer's configuration. The investigation provides robust scientific endorsement for the novel compound and its structural diversity, influenced by the solvatochromic sensitivity of the DFO precursor. Our approach to monitoring aggregation processes signifies a substantial shift in synthetic research paradigms, leveraging simple chemistry to yield an innovative contribution to forensic science methodologies.

Biochemical and structural impact of two novel missense mutations in cystathionine β-synthase gene associated with homocystinuria.

Homocystinuria is a rare disease caused by mutations in the CBS gene that results in a deficiency of cystathionine β-synthase (CBS). CBS is an essential pyridoxal 5'-phosphate (PLP)-dependent enzyme in the transsulfuration pathway, responsible for combining serine with homocysteine to produce cystathionine, whose activity is enhanced by the allosteric regulator S-adenosylmethionine (SAM). CBS also plays a role in generating hydrogen sulfide (H2S), a gaseous signaling molecule with diverse regulatory functions within the vascular, nervous, and immune systems. In this study, we present the clinical and biochemical characterization of two novel CBS missense mutations that do not respond to pyridoxine treatment, namely c.689T > A (L230Q) and 215A > T (K72I), identified in a Chinese patient. We observed that the disease-associated K72I genetic variant had no apparent effects on the spectroscopic and catalytic properties of the full-length enzyme. In contrast, the L230Q variant expressed in Escherichia coli did not fully retain heme and when compared with the wild-type enzyme, it exhibited more significant impairments in both the canonical cystathionine-synthesis and the alternative H2S-producing reactions. This reduced activity is consistent with both in vitro and in silico evidence, which indicates that the L230Q mutation significantly decreases the overall protein's stability, which in turn, may represent the underlying cause of its pathogenicity.

Synergistic Effect of He for the Fabrication of Ne and Ar Gas-Charged Silicon Thin Films as Solid Targets for Spectroscopic Studies.

Sputtering of silicon in a He magnetron discharge (MS) has been reported as a bottom-up procedure to obtain He-charged silicon films (i.e., He nanobubbles encapsulated in a silicon matrix). The incorporation of heavier noble gases is demonstrated in this work with a synergistic effect, producing increased Ne and Ar incorporations when using He-Ne and He-Ar gas mixtures in the MS process. Microstructural and chemical characterizations are reported using ion beam analysis (IBA) and scanning and transmission electron microscopies (SEM and TEM). In addition to gas incorporation, He promotes the formation of larger nanobubbles. In the case of Ne, high-resolution X-ray photoelectron and absorption spectroscopies (XPS and XAS) are reported, with remarkable dependence of the Ne 1s photoemission and the Ne K-edge absorption on the nanobubble's size and composition. The gas (He, Ne and Ar)-charged thin films are proposed as "solid" targets for the characterization of spectroscopic properties of noble gases in a confined state without the need for cryogenics or high-pressure anvils devices. Also, their use as targets for nuclear reaction studies is foreseen.

Highly Sensitive Temperature Sensors Resulting from the Luminescent Behavior of Sm3+-Doped Ba2MgMoO6 High-Symmetry Double-Perovskite Molybdate Phosphors.

We present double-perovskite molybdate with the formula of Ba2MgMoO6 doped with Sm3+ ions as a potential red phosphor to improve the color characteristics of white-light-emitting dioded (wLEDs). The new orange-red phosphor was synthesized using the co-precipitation (CP) method, and then its structural and spectroscopic properties were determined. Red emission at 642.6 nm dominates, which results from the electric dipole (ED) transition of the 4G5/2 → 6H9/2 type, and the materials are characterized by short luminescence decay times. BMM:Sm3+ is, to our best knowledge, the clearest example of dominant red emission of Sm3+ resulting from the location of the dopant in octahedral sites of high-symmetry cubic structure. In the sample containing 0.1% Sm3+, Sm3+ ions are located in both Mg2+ and Ba2+ sites, while at higher concentrations the Ba2+ site is less preferable for doping, as a result of which the emission becomes more uniform and single-site. The relative sensitivity calculated from FIR has a maximum of 2.7% K-1 at -30 °C and another local maximum of 1.6% K-1 at 75 °C. Such value is, to the best of our knowledge, one of the highest achieved for luminescent thermometry performed using only Sm3+ ions. To sum up, the obtained materials are good candidates as red phosphor to improve the color characteristics of wLEDs, obtaining a color-rendering index (CRI) of 91 and coordinated color temperature (CCT) of 2943 K, constituting a warm white emission. In addition to this, a promising precedent for temperature sensing using high-symmetry perovskite materials is the high sensitivity achieved, which results from the high symmetry of the BMM host.